014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Mobiele ontvetterbak air operated double diaphragm pumpshave

air operated double diaphragm pumpshave long been recognized as the most flexible pumps of the industry for handing difficult liquids at relatively low pressures and flows

one for partial measures resettable and one for total measures not resettable that underline the dispensed fluid

These pumps are advised for the transfer of low - medium viscosity oil (SAE 15/130)

Het mooie van deze uitvoering is de 20 liter opvangbak aan de bovenkant

014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Mobiele ontvetterbak air operated double diaphragm pumpshaveIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.