Wilson - Neck Die Punch (Ground Pin & Standard Pin) Primer Seater full-length sizing and shoulder bump

full-length sizing and shoulder bump neck size

525mm long (1/2" O

Clearance: 8 mm/

An optional decapping rod for this die is designed to work with all 17 caliber cases and will accommodate the small

Wilson - Neck Die Punch (Ground Pin & Standard Pin) Primer Seater full-length sizing and shoulder bumpReplacement Wilson Neck Die Punch Replacement punch for Wilson neck sizing dies (Arbor press type) It determining which size to choose, measure the length of the rod (less the pin approximately) in inches If not an exact match choose the next size longer rod All these neck die rods are 0. 220 in diameter except the rods for the 17cal and 20cal dies. Which are 0. 155 in diameter. Standard pin fits normal flash hole sizes which are most cartridges (0.