014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Dubbelwerkende pneumatische oliepompen These pumps are advised for

These pumps are advised for the transfer of low viscosity oil (SAE 15/80)

Outlet F10X1

Those are suitable for central supply of plants where a major quantity of grease and a major pressure at long and short distance are required

Suitable for high pressure transfer of high viscosity grease and fluids over short and long distances and for central distribution plants with multiple distribution points

014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Dubbelwerkende pneumatische oliepompen These pumps are advised forIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.