Galfer Post Frame Or Fork To Post Caliper Brake Mount - 43mm Increase PDP|PLP|Rail Material DH-1 Dummy Hub

DH-1 Dummy Hub

to determine which offset is require for the crankarm you wish to use

Deep Peri-Canal: Continuous relief channel from tip to tail

dries 4x faster than cotton so it's a great choice for a tee to wear out on the trails before heading off for a feed and a drink afterwards

Galfer Post Frame Or Fork To Post Caliper Brake Mount - 43mm Increase PDP|PLP|Rail Material DH-1 Dummy HubGalfer post to post brake mounts, allowing for up to a huge 63mm increase in rotor size. Mounting is via four bolts, with two fixed to the caliper and two fixed to the fork (front) or the frame (rear). With this system the caliper stays firmly attached and well placed relative to the brake disc, avoiding vibrations and or torsions that would cause braking noise or disc deformation. Options: SB001: 40mm increase SB002: 20mm increase SB003: 63mm increase